Back Panel With Ports, Buttons, Connectors, And Switch - NETGEAR Nighthawk D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
LED
WiFi On/Off button with
WiFi LED
WPS button with WPS
LED
You can use the LED On/Off switch on the back panel of the modem router to turn most LEDs on the top
of the modem router on or off (see
If you turn off the LEDs, the Power LED remains on.

Back Panel with Ports, Buttons, Connectors, and Switch

The back panel of the modem router provides ports, buttons, antenna connectors, a DC power connector,
and an LED switch. For information about attaching the antennas, see
Description
• Solid white or solid amber. A powered-on device is connected to the Ethernet
port.
• Blinking white or blinking amber. Data is being transmitted over the port.
• Off. No powered-on device is connected to the Ethernet port.
Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on
and off.
If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned
off and you cannot use WiFi to connect to the modem router.
For more information, see
on page 298.
This button lets you use WPS to join the WiFi network without typing the WiFi
password. The WPS LED blinks white during this process and then lights solid white.
For more information, see
114.
Back Panel with Ports, Buttons, Connectors, and Switch
Hardware Overview of the Modem Router
Control the WiFi Radios
Use WPS to Add a Device to the WiFi Network
15
on page 123 and WiFi LED Is Off
on page 15).
Attach the Antennas on page 11.
on page