Indication Of Transferred Calls - Mitel 6863i User Manual

COMPLETING A TRANSFER TO A CONTACT IN PHONE DIRECTORY
Users can complete a blind transfer to a contact in their directory. If a user is in a call and
initiates a transfer, they can navigate to the Directory screen and press the Transfer key again
to trigger a blind transfer. There is no change to start a consultative call.
To Transfer a Call to a Contact in the Phone Directory:
1. Connect to Party 1 (if not already connected). Party 1 is the party you want to transfer.
2. Press the programmed Transfer key.
3. Press the programmed Directory key and select a contact.
4. To complete a blind transfer, press the programmed Transfer key again before the receiv-
ing end answers.
To complete a consultative transfer, press
speak with Party 2 before pressing the programmed Transfer key again to transfer Party
1 to Party 2.
To cancel the transfer, press the

INDICATION OF TRANSFERRED CALLS

When you transfer an active call, the near-end phone displays a Call Transferred screen when
a call is transferred and the far-end call is dropped. The following is the Call Transferred screen
on the 6863i phone:
Dial to call the contact. Remain on the line to
4
key.
L1 Call Transferred
Handling Calls
97