Mitel 6863i User Manual page 124

Mitel 6863i SIP Phone Release 4.0.0 SP1 User Guide
USING CFWD VIA THE IP PHONE UI
Once CFWD is enabled on your phone, you can access and change the configuration using
the IP phone UI or the Mitel Web UI. You can access the CFWD menus by pressing a
pre-configured CFWD key, or by selecting Options > Call Forward from the IP phone UI.
Notes:
1. If there is no CFWD key configured on the phone or it is removed, you can still
2. If there is only one account configured on the phone, then the mode setting is
3. Using the Mitel Web UI, if you change the CFWD mode to Phone, all accounts
CFWD in Account Mode
IP PHONE UI
1. Use the
3
In the above example, account 1 has CFWD All enabled and account 2 has CFWD Busy
enabled.
2. Press the programmed Call Forward key. The Call Forward Mode screen displays. Use
the 2 and 5 navigation keys to scroll through each state type.
Indicates
CFWD Enabled
Indicates
no CFWD
phone number
configured
Indicates
CFWD Disabled
3. In the above example, CFWD All is enabled as indicated by a check mark (
Busy is enabled but no call forward phone number configured as indicated by a
CFWD No Answer is disabled, as indicated by an X.
4. Select a state for the account(s) in focus using the 2 and 5 navigation keys.
5. You can enable/disable any or all of the following states for an account:
122
enable CFWD via the IP phone UI at the path Options > Call Forward.
ignored and the phone behaves as if the mode was set to Phone.
synchronize to the current setting of Account 1.
and navigation keys to scroll through each account.
4
L1 John Smith
CFWD All
Tue Aug 20 2:55pm
Cfwd Mode
1. All
Done
Cfwd Mode
2. Busy
Done
Cfwd Mode
3. No Answer
Done
L2 J. Smith
CFWD Busy
Tue Aug 20 2:55pm
Change
Cfwd Mode
4. All Off
Done
!
Change
Cfwd Mode
5. All On
Done
X
Change
Change
Change

), CFWD
! , and