Indication Of Transferred Calls; Creating Conferencing Calls; Setting Up A Conference Call - Mitel 6873i User Manual

6873i User Guide for Clearspan
speak with Party 2 before pressing the Xfer key again to transfer Party 1 to Party 2.
To cancel the transfer, select Cancel on the display screen or press

INDICATION OF TRANSFERRED CALLS

When you transfer an active call, the near-end phone displays a Call Transferred screen when
a call is transferred and the far-end call is dropped. The following figure illustrates the Call
Transferred screen on the 6873i phone.

CREATING CONFERENCING CALLS

The 6873i IP phone uses the Conf softkey offered on screen when in a connected call.

SETTING UP A CONFERENCE CALL

Use the following procedure to create a conference call.
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup
the handset or press the
2. Call Party 2 by dialing their number (or answer an incoming call of a party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding
them to the conference.
4. Press the Conf softkey.
5. Enter the phone number of Party 3.
27 | Mitel
key. A line opens up.
.