Mitel 6863i User Manual page 101

6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding
them to the conference.
7. Press the programmed Conference key again to add Party 3 to the conference. Party 1
(which is yourself), Party 2, and Party 3 are all connected to a single conference.
8. To drop a party from the conference, use the
press the Drop key.
4
Creating a Conference Call by Joining Two Existing Calls
IP PHONE UI
1. Ensure you are on an active call with one of the parties with whom you wish to create a
conference (the other party should be placed on hold).
2. Press the or navigation keys to scroll to the party you wish to conference in.
3 4
3. Press the programmed Conference key.
The two parties will connect with you to form a conference call.
CENTRALIZED CONFERENCING (FOR SYLANTRO AND BROADSOFT
CALL MANAGERS)
The 6863i allows you to create multiple conferences with unlimited participants (depending on
your server limitations) when your Administrator enables Centralized Conferencing.
If your Administrator does not enable Centralized Conferencing, then the 6863i uses Local
Conferencing by default.
Your Administrator can configure Centralized Conferencing globally on all lines or on specific
lines. Although, for the global setting to work, you must configure the lines with the applicable
phone number.
1 1. Martha Gold
2. François Dupont
Drop
1 1. Martha Gold
2. François Dupont
Leave Drop
or
5 2
Handling Calls
navigation key to select the party and
99