Mitel 6863i User Manual page 127

CFWD in Phone Mode
IP PHONE UI
1. Use the and navigation keys to scroll through each account.
3 4
L1 John Smith
Tue Aug 20 2:55pm
2. In the above example, account 1 and account 2 are the accounts configured on the phone.
Both accounts have CFWD enabled as indicated by the CFWD All message.
Note: In Phone mode, when you change the call forward configuration for an account,
the change applies to all accounts.
3. Press the Call Forward key. The Call Forward menu displays. Use the 2 and 5 navigation
keys to scroll through each state type.
Indicates
CFWD Enabled
Indicates
no CFWD
phone number
configured
Indicates
CFWD Disabled
4. In the above example, CFWD All is enabled as indicated by a check mark (
Busy is enabled but no call forward phone number configured as indicated by a
CFWD No Answer is disabled, as indicated by an X.
5. Select a state using the 2 and 5 navigation keys.
6. You can enable/disable a specific account on the phone with any or all of the following
states. However, the configuration you set will apply to all accounts on the phone.
• All: Forwards all incoming calls for the respective account to the specified number.
• Busy: Forwards incoming calls to a specified number if DND has been enabled for that
account OR if the account is currently engaged in another call.
• No Answer: Forwards incoming calls to a specified number if the call has not been
answered for the specified number of rings.
Note: If CFWD All, CFWD Busy, and CFWD No Answer are all enabled (and/or if
the account has DND enabled), the CFWD All settings take precedence over CFWD
Busy and CFWD No Answer.
L2
CFWD All
Cfwd Mode
1. All
Done
Cfwd Mode
2. Busy
Done
Cfwd Mode
3. No Answer
Done
J. Smith
CFWD All
Tue Aug 20 2:55pm
Change
Cfwd Mode
4. All Off
Done
!
Change
Cfwd Mode
5. All On
Done
X
Change
Managing Calls
Change
Change

), CFWD
! , and
125