NETGEAR ProSAFE M5300 Series Software Administration Manual page 639
Managed switches
Hide thumbs
Also See for ProSAFE M5300 Series:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- User manual (764 pages)
Table of Contents
Advertisement
A screen similar to the following displays.
b. In the Interface list, select 1/0/21.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
6.
Enable RIP on interface 1/0/22.
a. Select Routing > RIP > Advanced > Interface Configuration.
A screen similar to the following displays.
b. In the Interface list, select 1/0/22.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
7.
Enable RIP on interface 1/0/24.
a. Select Routing > RIP > Advanced > Interface Configuration.
A screen similar to the following displays.
b. In the Interface list, select 1/0/24.
c. For RIP Admin Mode, select the Enable radio button.
d. Click Apply.
8.
Enable multicast globally.
a. Select Routing > Multicast > Global Configuration.
Managed Switches
PIM
639
Advertisement
Table of Contents
