Web Interface: Configure Area 1 As A Stub Area On A1 - NETGEAR ProSAFE M5300 Series Software Administration Manual
Managed switches
Hide thumbs
Also See for ProSAFE M5300 Series:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- User manual (764 pages)
Table of Contents
Advertisement
Web Interface: Configure Area 1 as a Stub Area on A1
1.
Enable IP routing on the switch.
a. Select Routing > IP > Basic > IP Configuration.
A screen similar to the following displays.
b. For Routing Mode, select the Enable radio button.
c.
Click Apply to save the settings.
2.
Assign IP address 192.168.10.1 to port 2/0/11.
a. Select Routing > IP > Advanced > IP Interface Configuration.
A screen similar to the following displays.
b. Scroll down and select the interface 2/0/11 check box.
Now 2/0/11 appears in the Interface field at the top.
c. Enter the following information:
•
In the IP Address Configuration Method field, select Manual.
•
In the IP Address field, enter 192.168.10.1.
Managed Switches
OSPF
148
Advertisement
Table of Contents
