Map Private-Vlan Promiscuous Port; Cli: Map Private-Vlan Promiscuous Port; Web Interface: Map Private-Vlan Promiscuous Port - NETGEAR ProSAFE M5300 Series Software Administration Manual
Managed switches
Hide thumbs
Also See for ProSAFE M5300 Series:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- User manual (764 pages)
Table of Contents
Advertisement
c. In the Host Primary VLAN field, enter 100.
d. In the Host Secondary VLAN field, enter 102.
e. Click Apply to save the settings.
Map Private-VLAN Promiscuous Port
The example is shown as CLI commands and as a web interface procedure.
CLI: Map Private-VLAN Promiscuous Port
Use the following commands to map private-VLAN promiscuous port 1/0/1 to a primary VLAN
(100) and to secondary VLANs (101-102).
(Netgear Switch)
(Netgear Switch)
(Netgear Switch)
(Netgear Switch)
Web Interface: Map Private-VLAN Promiscuous Port
1.
Map private-VLAN promiscuous port 1/0/1 to a primary VLAN (100) and to selected
secondary VLANs (101-102).
a. Select Security > Traffic Control > Private VLAN > Private VLAN Promiscuous
Interface Configuration.
A screen similar to the following displays.
b. Under Private VLAN Promiscuous Interface Configuration, select the 1/0/1
interface check box. Now 1/0/1 appears in the Interface field at the top.
c. In the Promiscuous Primary VLAN field, enter 100.
Managed Switches
#config
(Config)#interface 1/0/1
(Interface 1/0/1)#switchport private-vlan mapping 100 101-102
(Interface 1/0/1)#end
VLANs
62
Advertisement
Table of Contents
