NETGEAR ProSAFE M5300 Series Software Administration Manual page 413

6. To reduce the MAB authentication time, decrease the time of guest VLAN period.
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 1/0/10
(Netgear Switch) (Interface 1/0/10)#dot1x timeout guest-vlan-period 1
Web Interface: Configure the Switch to Perform MAB with a Microsoft
Network Policy Server
1. Enable 802.1X authentication on the switch:
a. Select Security > Port Authentication > Basic > 802.1X Configuration.
A screen similar to the following displays.
b. Under 802.1X Configuration, next to Administrative Mode, select the Enable radio
button.
c. Click Apply.
2. Configure RADIUS to authenticate 802.1X users:
a. Select Security > Management Security > Authentication List > Dot1x
Authentication List.
A screen similar to the following displays.
b. Select the dot1xList check box.
c. From the 1 menu, select Radius.
d. Click Apply.
Managed Switches
MAB
413