NETGEAR ProSAFE M5300 Series Software Administration Manual page 540

A screen similar to the following displays.
b. In the Group Name field, enter group1.
c. In the Group ID field, enter 1.
d. In the Group Mode list, select community.
e. Click Add.
5. Add port 6 and 7 to group1.
a. Select Security > Traffic Control > Private Group VLAN >Private Group
Membership.
A screen similar to the following displays.
b. In the Group ID list, select 1.
c. Click Unit 1. The ports display.
d. Click the gray boxes under ports 6 and 7. A check mark displays in each box.
e. Click Apply.
6. Create a private group, group2.
a. Select Security > Traffic Control > Private Group VLAN > Private Group
Configuration.
Managed Switches
DVLANs and Private VLANs
540