Web Interface: Configure The Stack Ports As Ethernet Ports - NETGEAR ProSAFE M5300 Series Software Administration Manual
Managed switches
Hide thumbs
Also See for ProSAFE M5300 Series:
- Hardware installation manual (32 pages) ,
- Installation manual (2 pages) ,
- User manual (764 pages)
Table of Contents
Advertisement
Web Interface: Configure the Stack Ports as Ethernet Ports
1.
On Switch A, configure a stack port as an Ethernet port.
a. Select System > Stacking > Advanced > Stack Port Configuration.
A screen similar to the following displays.
b. Scroll down and select the 2/0/28 check box.
c. In the Configured Stack Mode menu, select Ethernet.
d. Click Apply to save the settings.
2.
Reboot the switch.
a. Select Maintenance > Reset > Device Reboot.
A screen similar to the following displays.
b. In the Reboot Unit No. menu, select 2.
c. Click Apply.
3.
On Switch B, configure a stack port as an Ethernet port.
a. Select System > Stacking > Advanced > Stack Port Configuration.
A screen similar to the following displays.
Managed Switches
Switch Stacks
482
Advertisement
Table of Contents
