VTech ErisTerminal VSP735 Administrator And Provisioning Manual page 73

Setting
Work number attribute
Mobile number attribute
Home number attribute
Lookup for incoming
calls
Lookup in dialing mode
Using the WebUI
VSP735 Administrator and Provisioning Manual
Description
Sets the attribute for the work number. What you enter here
should match the work number attribute for entries on the
LDAP server (telephoneNumber, for example). This helps
ensure that the phone displays LDAP entries in the same
format as the Local Directory.
Sets the attribute for the mobile number. What you enter
here should match the mobile number attribute for entries
on the LDAP server (mobile, for example). This helps
ensure that the phone displays LDAP entries in the same
format as the Local Directory.
Sets the attribute for the home number. What you enter
here should match the home number attribute for entries
on the LDAP server (homePhone, for example). This helps
ensure that the phone displays LDAP entries in the same
format as the Local Directory.
Enables or disables LDAP incoming call lookup. If enabled,
the phone searches the LDAP directory for the incoming
call number. If the number is found, the phone uses the
LDAP entry for CID info.
Enables or disables LDAP outgoing call lookup. If enabled,
numbers entered in pre-dial or live dial are matched
against LDAP entries. If a match is found, the LDAP entry
is displayed for dialing.
73
Back to Contents