VTech ErisTerminal VSP735 Administrator And Provisioning Manual page 55

Programmable Key Type
Page
Multicast Page
Park Call
Retrieve Park Call
In Call DTMF
Using the WebUI
VSP735 Administrator and Provisioning Manual
Description
Configures the key to call one or a group of phones.
Pressing the key dials the Paging feature access code.
You must enter the feature access code for Paging on the
SIP Account Management page.
For some service providers, you must also enter a page
extension value in the Value column. This value will be
dialed along with the Paging feature access code.
You can configure pages to be automatically answered.
See "Page Auto Answer" under
Management" on page 39.
Configures the key to make outgoing multicast pages. In
the Value column, enter a valid Paging Zone ID (ranging
from 1 to 10). Multicast paging differs from standard paging
in that it is handled locally by the VSP735 and does not
require a subscription through the hosted server. To use
multicast paging, you must first set up paging zones on the
WebUI. See "Paging Zone" on page
pfk.x.multicast_zone in the configuration file.
Enables the user to park a call. Pressing the key dials the
Call Park feature access code (FAC). You must enter the
feature access code for Call Park on the SIP Account
Management page. In the Account column, select the
account on which the feature access code will be dialed
out. For example, choose Account 1 if you wish to use the
Call Park FAC that you entered for account 1.
For some service providers, you must also enter a park
extension in the Value column. This value will be dialed
along with the Call Park FAC or instead of the Call Park
FAC (if your configuration doesn't require the FAC). See
also sip_account.x.park_variant.
Enables the user to retrieve a parked call. Pressing the key
dials the Parked Call Retrieval feature access code (FAC)
configured on the SIP Account Management page. In the
Account column, select the account on which the feature
access code will be dialed out. For example, choose
Account 1 if you wish to use the Parked Call Retrieval FAC
that you entered for account 1.
For some service providers, you must also enter a park
retrieval extension in the Value column. This value will be
dialed along with the Parked Call Retrieval FAC or instead
of the Parked Call Retrieval FAC (if your configuration
doesn't require the FAC).
Configures the key to dial a string of numbers while the end
user is on a call. For example, pressing the key might dial a
conference access code. After selecting In Call DTMF,
enter the number to be dialed in the Value column. See
also pfk.x.incall_dtmf in the configuration file.
55
"SIP Account
60. See also
Back to Contents