VTech ErisTerminal VSP735 Administrator And Provisioning Manual page 36

To access the WebUI:
1. Ensure that your computer is connected to the same network as the VSP735. Your
computer may already be connected to the network through the PC port on the back of
the VSP735.
2. Find the IP address of the VSP735:
a. When the VSP735 is idle, press MENU.
b. Press  to highlight Status, and then press SELECT.
c. With Network highlighted, press SELECT.
The Network status screen appears.
d. On the Network status screen, note the IP Address.
3. On your computer, open an Internet browser. (Depending on your browser, some of the
pages presented here may look different and have different controls. Ensure that you
are running the latest update of your preferred browser.)
4. Type the VSP735 IP address in the browser address bar and press ENTER on your
computer keyboard.
The browser displays a window asking for your user name and password.
5. For the user name, enter admin. For the password, enter the default password,
admin. You can change the password later on the WebUI Security page, available
under Servicing.
6. Click OK.
The WebUI appears.
Click topics from the navigation bar along the top of the WebUI, and then click the links
along the left to view individual pages. For your security, the WebUI times out after 10
minutes, so if it is idle for that time, you must log in again.
The remaining procedures in this section assume that you are already logged into the
WebUI.
Using the WebUI
Network
IP: 10.88.51.133
DHCP: Enable
Subnet Mask: 255.255.0.0
Gateway: 10.88.3.120
DNS 1: 10.88.126.31
DNS 2: 10.88.126.10
SNTP: us.pool.ntp.org
VSP735 Administrator and Provisioning Manual
36
Back to Contents