VTech ErisTerminal VSP735 Administrator And Provisioning Manual page 61

Setting
Priority
Enable Incoming Page
Using the WebUI
VSP735 Administrator and Provisioning Manual
Description
Select the paging zone priority from 1 to 10. Zones with a
priority higher than another zone can interrupt the
lower-priority zone's active page.
In addition, a call priority setting is available in the
configuration file (page_zone.call_priority_threshold). This
priority setting also ranges from 1 to 10 (2 is the default). If
the paging zone priority is higher or equal to the call
priority, then a multicast page can interrupt an active,
dialing, or incoming call.
Select to enable the VSP735 to receive incoming pages for
that paging zone. If the "Enable Incoming Page" checkbox
is not selected, the phone will not listen for the multicast,
but will still be able to broadcast an outgoing page.
61
Back to Contents