VTech ErisTerminal VSP735 Administrator And Provisioning Manual page 30

VLAN ID
WAN VLan:
WAN port:
PC VLan:
PC port:
Cancel
3. Press
to enter characters. The valid range is 0 to 4095.
4. Press
5. Press
enter characters. The valid range is 0 to 4095.
6. Press
To set other settings (DNS and NTP):
1. From the Network setting menu, press
SELECT.
If DHCP is disabled, the Others menu appears. If DHCP is enabled, an error message
appears briefly before returning you to the Network setting menu.
Others
DNS 1:
DNS 2:
SNTP:
Cancel
2. Enter the IP address for the primary DNS server. Use the dial pad and the
key to enter characters. Press
3. Press
this server if the primary server does not respond.
4. Press
NTP server, you must manually enter the time and date settings.
5. Press
Configuration Using the Phone Menus
Disabled
0
Disabled
0
Save

and enter the WAN port number. Use the dial pad and the
 
and then press or

and enter the PC port number. Use the dial pad and the
Save .
0.0.0.0
0.0.0.0
us.pool.ntp.org
Backspc Add dot Save


and enter the IP address for the secondary DNS server. The VSP735 uses

and enter the IP address for the NTP server. If the VSP735 does not use an
Save .
VSP735 Administrator and Provisioning Manual

to enable or disable the PC port VLan.
 
to highlight Others, and then press
or

or to advance to the next character.
30
Backspc soft key
Backspc soft key to
Add dot soft
Back to Contents