Answering A Call; Temporary Ringer Silencing; Last Number Redialing - AT&T SynJ SB67158 User Manual

Telephone base operation
Telephone base basic operation

Answering a call

To answer a call:
• Lift the handset, press
ON button on a registered cordless headset.
/OFF
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired
line, then lift the handset.

Temporary ringer silencing

Press MUTE while the telephone is ringing to silence the ringer temporarily
on the telephone base only. This turns off the ringer without disconnecting
the call. The next incoming call rings normally at the preset volume.

Last number redialing

The last 10 telephone numbers dialed (up to 32 digits) are stored in system memory.
To view the 10 most recently dialed numbers:
1. Press REDIAL to enter the redial list and
PAUSE/
display the most recently called number.
2. Press or , or press
view other recently called numbers.
3. Press EXIT to exit the redial list.
To redial a number:
• To dial the displayed number, lift the handset, or
SPEAKER or HEADSET.
press
• To override automatic line selection, press LINE 1-LINE 4
for the desired line, then lift the handset.
To edit a number:
While the desired number displays, press
• Press REP or SKIP to move the cursor to the left or right.
Press REMOVE to backspace and delete a digit.
•
• Press PAUSE
pause (a P appears) (page 62).
• Press FLASH to enter a flash (page 62).
To delete a number:
• While the screen displays the desired number, press
REMOVE to delete the number from the redial memory.
SPEAKER, HEADSET or the
REDIAL repeatedly to
PAUSE/
lift the handset, or
to enter a 3.5 seconds dialing
/REDIAL
ENTER to enter editing mode.
MENU/
3.5 seconds dialing dialing
46
8888832445
Line1
8888832445
8888832445
Deleted