Answering A Call - AT&T SB67020 User Manual

Answering a Call

To answer a call:

1
Graham Bell
232-555-0176
Answ er Ignore Fw dVM
Figure 25. Incoming Call
Graham Bell 1
232-555-0176
Answ er Fw dVM
Figure 26. Ignored Call
0:05
Graham Bell 1
232-555-0176
Transfer Conf Park
Figure 27. Active Call
Incoming Calls
Synapse SB67020 Deskset User's Guide
To answer an incoming call, as shown in Figure 25, do one of the following:
Lift the handset.

Press to answer using the Preferred Audio method. See

Mode" on page 127.
Press SPEAKER to use the speakerphone.

Press HEADSET to use a headset connected to the Headset jack. See

Management Using a Headset" on page
For multiple incoming calls, press the corresponding Call Appearance or Line

Appearance key to answer each call. New calls remain in the display until you answer
or until you press
The active call screen appears, as shown in Figure 27 (Call Appearance mode shown).
If you are listening to Voicemail when a call comes in, press
Appearance mode)
continue.
Call Appearance mode only—If Auto Answer is enabled, the call is automatically
answered after the set time delay. See
Once you answer a call:
Previous active calls are automatically placed on hold.

If you were predialing, that call is canceled.

57.
. See Figure 26.
to redirect the call and allow message playback to
"Auto Answering" on page
40
"Preferred Audio
"Call
or (in Call
44.