Rear Brake Linings - PEUGEOT Speedfight3 Workshop Manual

SERVICE OPERATIONS

Rear brake linings

- Actuate the brake control lever and check
the position of the wear mark on the cam
tierod (A) compared to the mark (B) on the
engine housing.
- If the cam tierod mark is lined up with or
passes the wear mark on the engine
housing, the brake lining must be replaced.
Disassembly
- Remove the 2 nuts attaching the exhaust
flange to the cylinder.
- Disconnect the air hose from the
exhaust (1).
- Remove the 2 screws fastening the
mudguard (2).
- Remove the exhaust (3 screw).
30
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
2
B
2
1
A