Dns - TP-Link TD-W8960N User Manual

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide

Note:
RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE).

4.4.11 DNS

When you select the connection type PPPoE, PPPoA or IPoA for WAN configuration, you will see
the DNS menu in the Web-based Utility. It includes DNS Server and Dynamic DNS submenus.
4.4.11.1 DNS Server
Choose "Advanced Setup""DNS""DNS Server", and you can see the DNS Server
Configuration screen as shown in Figure 4-53.
Figure 4-53
For PPPoA, PPPoE enabled PVC(s), please select the Select DNS Server Interface from
available WAN interfaces checkbox, this modem router will accept automatically the first
received DNS assignment from the selected configured WAN interface during the connection
establishment.
For single PVC with IPoA, static IPoE protocol, please select the Use the following Static DNS IP
address checkbox, and enter the primary and /or optional secondary DNS server IP addresses
provided by your ISP.
Here you can also select a configured WAN interface for IPv6 DNS server or enter the static IPv6
DNS server Addresses provided by your ISP.
Click the Save/ Apply button to save the new configuration.
49