Reboot; Logout - TP-Link TD-W8960N User Manual

TD-W8960N
To update the router's software:
1. Download the latest software upgrade file from the TP-LINK website (http://www.tp-link.com).
2. Click Browse to view the folders and select the image file or enter the exact path to the image
file location in the text box.
3. Click the Update Firmware button.

Note:
1) There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the router itself, you can try to
upgrade the firmware.
2) Before upgrading the router's firmware, you should write down some of your customized
settings to avoid losing important configuration settings of the router.
3) Do not turn off the router or press the RESET button while the software is being updated.
4) The router will reboot after the Upgrading is finished.
4.8.8

Reboot

Choose "Management""Reboot", you can see the screen (shown in Figure 4-116) which allows
you to reboot the router.

Note:
5) After you clicked the Reboot button, please wait for a while before reopening your web
browser.
6) Do not turn off the router or press the RESET button while the router is rebooting.
7) If necessary, reconfigure your PC's IP address to match your new configuration.

4.9 Logout

Choose "Logout", and you will back to the login screen as shown in Figure 4-117.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-116
96