Basic - TP-Link TD-W8960N User Manual

TD-W8960N
4.6.1

Basic

Choose menu "Guest Network""Basic", and you will see the screen as shown in Figure 4-98.
This feature allows you to create a separate network for your guests without allowing them to
access your main network and the computers connected to it.
You can enable or disable Guest Network. When you enable this function, you could set wireless
parameters for Guest Network.
Guest SSID: The guest network name. When setting up a Guest network, it is strongly

recommended to use a name that easily distinguishes it from your primary network.
Authentication Type: Select the Authentication Type from the drop-down list.

Encryption: You can select either Auto, or AES+TKIP.

Wireless Password: Here display the default wireless password, you can click Click here to

display to see the default wireless password, and you can also enter ASCII characters
between 8 and 63 characters or 8 to 64 Hexadecimal characters to create a new password.
Group Key Update Period: Specify the group key update interval in seconds. The value

should be 30 or above. Enter 0 to disable the update.
Allow Guests to access my Local Network: The guests have access to your Local

Network, but can not login the modem router's web management interface.
Guest Network Isolation: This function can isolate wireless clients on your guest network

from each other. Client isolation is disabled by default.
Guest Network Bandwidth Control: With this function, you can configure the Upstream

Bandwidth and Downstream Bandwidth for guest network.
Click Save/Apply to save your settings.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-98
84