Set Up A Dynamic Dns Service Account - TP-Link Archer VX1800v User Manual

Chapter 16
• DSL Modulation Type:
Do not change the default settings unless necessary.
• Annex Type:
the default settings unless necessary.
• Bit Swap: Select this checkbox to enable the Bit Swap feature. With bit-swapping,
the router can swap bits around different channels, allowing it to robustly adapt
to changing telephone line conditions.
• SRA: Select this checkbox to enable the SRA (Seamless Rate Adaptation)
feature that prevents ADSL data rate interference caused by the cross-talk
between telephone lines.

16. 4. Set Up a Dynamic DNS Service Account

Most ISPs (Internet service providers) assign a dynamic IP address to the router and
you can use this IP address to access your router remotely. However, the IP address
can change any time and you don't know when it changes. In this case, you might need
the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your
friends to access your router and local servers (FTP, HTTP, etc.) using domain name, in
no need of checking and remembering the IP address.
Note: DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the modem router.
To set up DDNS, please follow the instructions below:
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
3. Select the DDNS service provider
4. To use TP-Link DDNS service, you should log in with your TP-Link ID.
5. If you choose other DDNS service, you should also log in with your DDNS account,
select a service provider and click
and domain name of the account (such as lisa.ddns.net).
Select a DSL modulation type from the drop-down list.
Select a DSL annex type from the drop-down list. Do not change
> Network > Dynamic DNS.
(TP-Link, Dyndns or NO-IP).
Go to register ...
Customize Your Network Settings
Enter the username, password
107