Ipsec - TP-Link TD-W8960N User Manual

TD-W8960N 300Mbps Wireless N ADSL2+ Modem Router User Guide

4.4.16 IPSec

Choose "Advanced Setup""IPSec", you can Add/Remove or Enable/Disable the IPSec tunnel
connections on the screen as shown in Figure 4-64.
Figure 4-64
This section will guide you to configure a VPN tunnel between two TD-W8960Ns. The topology is
as follows.

Note:
You could also use other VPN routers to set VPN tunnels with TD-W8960N. TD-W8960N supports
up to 10 VPN tunnels simultaneously.
Click Add New Connection in Figure 4-64 and then you will enter the screen shown in Figure
4-65.
56