Security - TP-Link TD-W8960N User Manual

TD-W8960N
Click the Save/Apply button to save your settings.
4.4.6

Security

Choose "Advanced Setup""Security", and you will see the security screen including IP
Filtering and MAC Filtering (only effective in Bridging mode) submenus.
4.4.6.1 IP Filtering
The IP address filtering feature makes it possible for administrators to control user's access to the
Internet, which is based on user's IP. The IP address filtering here means Outgoing, the detailed
descriptions are provided below.
Choose "Advanced Setup""Security""IP Filtering", you can configure Outgoing Filtering
rules on the screen (shown in Figure 4-31).
The Outgoing IP Filtering feature allows you to control some IP traffic from LAN to access to some
specifically addresses. By default, all outgoing IP traffic from LAN is allowed, but some IP traffic
can be BLOCKED by setting up filters.
Set up an Outgoing IP Filtering rule:
1. Click the Add button in Figure 4-31, and you will see the next screen as shown in Figure 4-32.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-30
Figure 4-31
36