Table of Contents
Advertisement
Chapter 13
2. Click
Scan
or enter the
3. Enter the
IP address
4. Enter the
Description
5. Tick the
Enable This Entry
13. 4. Set Up a Dynamic DNS Service Account
Most ISPs assign a dynamic IP address to the router and you can use this IP address
to access your router remotely. However, the IP address can change from time to time
and you don't know when it changes. In this case, you might apply the DDNS (Dynamic
Domain Name Server) feature on the router to allow you and your friends to access your
router and local servers (FTP, HTTP, etc.) using a domain name without checking and
remembering the IP address.
Note:
DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. Select the DDNS
to select TP-Link so that you can enjoy TP-Link's superior DDNS service. Otherwise,
please select NO-IP or DynDNS. If you don't have a DDNS account, you have to
register first by clicking
MAC address
to reserve for the client device.
for this entry.
checkbox and click OK.
Network
>
Dynamic
Service Provider
(TP-Link, NO-IP or DynDNS). It is recommended
Go to
register.
Customize Your Network Settings
of the client device.
DNS.
60
Advertisement
Table of Contents
