TP-Link TD-W8961ND Operation Manual

300mbps wireless n adsl2+ modem router

Hide thumbs Also See for TD-W8961ND:

Download this manual See also: User Manual, Installation Manual

This document will provide you with all the information you need to set up your

TP-Link TD-W8961ND Modem/Router for use with Memory Lane Computers' internet.

Page 1 This document will provide you with all the information you need to set up your TP-Link TD-W8961ND Modem/Router for use with Memory Lane Computers' internet.
Page 2 Please NOTE: The following contents should be found in your package:  One TD-W8961ND 300Mbps Wireless N ADSL2+ Modem Router  One Power Adapter for TD-W8961ND 300Mbps Wireless N ADSL2+ Modem Router  Quick Installation Guide  One RJ45 cable ...
Page 3 To Start, 1) First type in 192.168.1.1 in the browser's address bar as shown in the picture below. 2) Click on “Quick Start”...
Page 4 3) Run Wizard 4) Window Opens Up, Then Click ‘Next’...
Page 5 5) Time Zone: Mountain Time 6) Dynamic IP Address...
Page 6 7) Connecting to ADSL Network This page contains the settings needed to connect to the ADSL network. They Need to look the same as above; all you should need to do is change the VPI to 0 and VCI to 33. Leave the connection type alone (unless it’s different from the image Above).
Page 7 You're now done configuring the modem for use with MLC's internet. However, if this is a Brand New Router we will need the MAC (Media Access Controller) address in our systems at Memory Lane for the connection to work properly. It can be obtained from the status page within the router's settings.