AMX MCP-106 Instruction Manual page 32

6. Verify the target's System number matches the value listed within the active System folder in the OnLine Tree.
The Device number is always 0 for the ControlPad.

Note that the Port field is disabled (FIG. 37).

Send to NetLinx Device dialog (showing on-board MCP-106 firmware update)
FIG. 37
7. Click Send to begin the transfer. The file transfer progress is indicated in the Progress section of the dialog. The ControlPad
reboots once the transfer is complete.
8. Click Close when the ControlPad is finished rebooting.
9. In the OnLine Tree, right-click on the Master and select Refresh System. This establishes a new connection and refreshes the
device list and their firmware versions in your system.
Once the process is complete, you can upgrade the remaining firmware files. All device files must be kept at compatible firmware
versions for proper operation. Therefore, all files should be used when upgrading any firmware associated with the ControlPads.
Be sure to follow the required order for installing firmware files. See the Required Order of Firmware Updates section on page 30 for
more information.
Instruction Manual - Massio ControlPads and Keypads
Upgrading Firmware
32