Downloading The Latest Firmware Files From Www.amx.com; Netlinx Controllers; Master And Device Firmware Kit Files For Massio Controlpads; Downloading Massio Controlpad Firmware Files On Www.amx.com - AMX MCP-106 Instruction Manual

Downloading the Latest Firmware Files from www.amx.com

NetLinx Controllers

Massio ControlPads require two firmware (*.kit) files: Master firmware and Device firmware. The Master firmware file is not the
same as the Device firmware file.
Both files should be used when upgrading any firmware associated with the Integrated Controllers.
NOTE: The process of downloading and transferring f irmware f iles is the same for all types of f irmware. However, it is important that
the f irmware f iles are upgraded in specif ic following order for Massio ControlPads (see the Required Order of Firmware Updates
section on page 30).

Master and Device Firmware Kit Files for Massio ControlPads

Below is a table outlining the Master and Device Firmware (*.kit) files used by Massio ControlPads:
Master and Device Firmware Files for Massio ControlPads
MCP-106/108
NOTE: The HTTP f irmware kit enables you to upgrade f irmware via an HTTP server. Follow the same steps in NetLinx Studio as you
would with a typical f irmware upgrade. Upgrading f irmware via HTTP server is typically much faster than upgrading with the standard
f irmware kit f iles. See the Upgrading Firmware via NetLinx Studio section on page 31 for more information.

Downloading Massio ControlPad Firmware Files on www.amx.com

Visit the appropriate product page on www.amx.com for the latest Master and Device Controller firmware (*.kit) files for your Massio
ControlPad. Firmware file links are available along the right-side of the catalog page.
Firmware files are bundled in a ZIP file, along with a Readme.TXT file that provides details on this firmware release.
1. Accept the AMX Licensing Agreement.
2. Download the ZIP file and unzip the contents to a known location.

Required Order of Firmware Updates

The Upgrading Firmware via NetLinx Studio instructions (below) apply equally to all types of firmware files. However, it is important
that the firmware files are upgraded in the following order:
1. First, upgrade the Device firmware.
2. When that process is complete, upgrade the Master firmware.
Instruction Manual - Massio ControlPads and Keypads
Master Firmware: SW2102_MCP_10x_vx_x_xxx.kit
Device Firmware: SW2102_MCP_10x_Device_vx_xx_x.kit
HTTP Firmware Kit: SW2102_MCP_10x_vx_x_xxx-http.kit
Upgrading Firmware
30