4.
Edit the DNS Address fields as necessary:
• Domain Suffix:
• DNS IP #1, #2, #3:
• Set DNS Information:
5.
Click the Set DNS Information button to set the new IP address information on the ControlPad. It is not necessary to reboot
the ControlPad if only the DNS Address information is changed.
6.
Click Done to close this dialog.
Connecting to the ControlPad via USB
If you do not have a DHCP server or if the ControlPad has an unknown static IP address, you can obtain the IP address of the
controller via USB.
1.
Using a standard Micro-USB cable, connect the Program Port on the rear panel of the ControlPad to your PC.
2.
In NetLinx Studio, select Settings > Workspace Communications Settings to open the Workspace Communication Settings
dialog.
Workspace Communication Settings dialog
FIG. 31
3.
Click System Settings to open the Communication Settings dialog.
Communication Settings dialog - Recent tab
FIG. 32
Instruction Manual - Massio ControlPads and Keypads
Use this field to view/edit the target master's current Domain Suffix.
Use these fields to view/edit the target master's current DNS IP address(es).
Sets new DNS IP information, as indicated in this dialog.
Note: The Master Controller does not require a reboot if only changing DNS information.
Initial Configuration
26