Display Call Information; Changing The Volume; Changing The Ringer Sound - Avaya 4400 User Manual

Phone Controls

Display Call Information

Changing the Volume

Changing the Ringer Sound

4400, 4600 & 6400 Telephones
IP Office
You can display information about which number another extension is
calling.
To display call information:
1. Press Menu twice.
2. Select Call.
3. Enter the extension or group number (use the top-left display key to
backspace).
4. Press and select Listen.
5. Press Exit .
You can alter the volume of the handsfree speaker, the handset speaker
and the ringer.
To change the ringer volume:
1. Without lift the handset, press the either end of the volume button. Use
either end of the button to adjust the volume.
To change the speaker volume:
1. Lift the handset to adjust handset volume or press Spkr
handsfree volume.
2. Press the either end of the Volume
button to adjust the volume up
This feature is available on the 4600 and 6400 series phones only. You
can select the type of ring that your phone uses.
To change the ringer sound:
This feature can also be set under a DSS key, see page 21.
1. Without lift the handset, press Conf
2. You will hear a ring. Press Conf again to hear another ring type.
3. Repeat pressing Conf until you hear the ring that you want. Wait until
you hear a ring again and then a tone. The ring is now saved.
key. Use either end of the
or down .
.
40DHB0002USAL - Issue 1 (11/30/2001)
Page 18
to adjust the
Page 18