6.6.1 Upload System Firmware; Figure 6-13 Menu 24.7 - System Maintenance - Upload Firmware; Figure 6-14 Menu 24.7.1 - Uploading System Firmware - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Modem

Figure 6-13 Menu 24.7 - System Maintenance - Upload Firmware

6.6.1 Upload System Firmware

The firmware is the program that controls the functions of the Prestige. Menu 24.7.1 shows you the
instructions for uploading the firmware. If you answer yes to the prompt, the Prestige will go into debug
mode. Follow the procedure below to upload the firmware:
1. Enter "atur" after the "Enter Debug Mode" message.
2. Wait for the "Starting XMODEM upload" message before activating Xmodem upload on
your terminal.
3. After successful firmware upload, enter "atgo" to restart the Prestige.
Menu 24.7.1 -- System Maintenance - Upload System Firmware
To upload system firmware:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atur" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
Xmodem upload on your terminal.
4. After successful firmware upload, enter "atgo" to restart the
system.
Warning: Proceeding with the upload will erase the current router
firmware.

Figure 6-14 Menu 24.7.1 - Uploading System Firmware

6-10
Menu 24.7 -- System Maintenance - Upload Firmware
1. Upload System Firmware
2. Upload System Configuration File
Enter Menu Selection Number:
Do You Wish To Proceed:(Y/N)
System Maintenance