Tcp/Ip Ethernet Setup; Figure 3-1 Menu 3 - Tcp/Ip Ethernet Setup; Table 3-1 Tcp/Ip Ethernet Setup Menu Fields - ZyXEL Communications Prestige 642 User Manual

Prestige 642 ADSL Modem
You can obtain your IP address from the IANA, from an ISP, or assigned from a private network. If you
belong to a small organization and your Internet access is through an ISP, the ISP can provide you with the
Internet addresses for your local networks. On the other hand, if you are part of a much larger organization,
you should consult your network administrator for the appropriate IP addresses.
Note: Regardless of your particular situation, do not create an arbitrary IP address; always follow the
guidelines above. For more information on address assignment, please refer to RFC 1597, Address
Allocation for Private Internets and RFC 1466, Guidelines for Management of IP Address Space.
3.3

TCP/IP Ethernet Setup

You will now use Menu 3 to configure your Prestige for TCP/IP.
To edit Menu 3, enter 3 to open the Menu 3 - TCP/IP Setup from the Main Menu.
TCP/IP Setup:
IP Address= 192.68.1.1
IP Subnet Mask= 255.255.255.0
Press Space Bar to Toggle.
Follow the instructions in the following table to configure TCP/IP parameters for the Ethernet port.
Field Description
TCP/IP Setup
IP Enter the (LAN) IP address of your Prestige in dotted decimal
Address notation
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
3-2
Menu 3 - TCP/IP Ethernet Setup
Enter here to CONFIRM or ESC to CANCEL:
Figure 3-1 Menu 3 – TCP/IP Ethernet Setup

Table 3-1 TCP/IP Ethernet Setup Menu Fields

Example
192.168.1.1
(default)
255.255.255.0
Internet Access