Applying A Filter; 5.5.1 Remote Node Filters - ZyXEL Communications Prestige 642 User Manual

Menu 21.3 - Filter Rules Summary
# A Type
- - ---- --------------------------------------------------------------- - - -
1 Y Gen Off=128, Len=4, Mask=789abcde, Value=789abcde
2 N
3 N
4 N
5 N
6 N
Enter Filter Rule Number (1-6) to Configure: 1
This shows you what you
configured in the previous
menu.
Figure 5-6 Example Filter Rules Summary – Menu 21.3
After you've created the filter set, you must apply it.
5.5

Applying a Filter

This section shows you where to apply the filter(s) after you design it (them).

5.5.1 Remote Node Filters

Go to Menu 11.1 (shown next) and enter the number(s) of the filter set(s) as appropriate. You can cascade
up to four filter sets by entering their numbers separated by commas.
SNMP Configuration
Prestige 642 ADSL Modem
Filter Rules
M = N means an action can be taken
immediately. The action is to drop the
packet (m = D) if the action is matched and
to forward the packet immediately (n = F) if
the action is not matched no matter whether
there are more rules to be checked (there
aren't in this example).
M m n
N D F
5-9