Removing A Hard Drive From A Hard Drive Carrier - Dell DR4300e Owner's Manual

Steps
1. If a hard drive blank is installed in the hard drive slot, remove it.
2. Install a hard drive in the hard drive carrier.
3. Press the release button on the front of the hard drive carrier and open the hard drive carrier handle.
4. Insert the hard drive carrier into the hard drive slot until the carrier connects with the backplane.
5. Close the hard drive carrier handle to lock the hard drive in place.
Figure 70. Installing a hot-swappable hard drive or SSD
1. release button
3. hard drive or SSD carrier handle
Related Links
Removing a 3.5-inch hard drive blank

Removing a hard drive from a hard drive carrier

Prerequisites
1. Keep the Phillips #1 screwdriver ready.
2. Remove the hot swappable hard drive carrier from the system.
Steps
1. Remove the screws from the slide rails on the hard drive carrier.
2. Lift the hard drive out of the hard drive carrier.
148
2. hard drive or SSD carrier