Installing A Non-Redundant Cabled Ac Power Supply Unit - Dell EMC PowerEdge R540 Installation And Service Manual

Figure 110. Removing non-redundant cabled AC PSU
Next step
1 Installing a non-redundant cabled AC power supply.
Related link
Removing the air shroud
Removing an expansion card riser

Installing a non-redundant cabled AC power supply unit

Installing a non-redundant cabled AC power supply unit
Prerequisite
1 Follow the safety guidelines listed in
Steps
1 Unpack the new power supply unit (PSU).
2 Slide the new PSU into the PSU cage until the PSU is fully seated.
3 Using Phillips #2 screwdriver, tighten the screw to secure the PSU to the system.
Safety instructions.
Installing and removing system components 153