Signature Command: Fan/Blower Systems; Blotkhlsc Signature Command Blower - Vermont Castings KHLDV400PTSCSB Installation And Operating Instructions Manual

SIGNATURE COMMAND: OPTIONAL FAN BLOWER SYSTEM
Electrical Grounding Instructions: This
appliance is equipped with a three-prong
(grounding) plug for your protection against
shock hazard and should be plugged directly
into a properly grounded three-prong
receptacle.
The black and white wires on the AC box
wiring harness are marked 'Blower', 'Light'
and 'Aux'. It is important to use the wires
marked 'Blower' or the control will not work
correctly.
Blower (300w Max)
Figure 41 -
BLOTKHLSC Blower Wiring Diagram
20306742
To Junction Box
In Fireplace
{
Light WHITE
BLACK
WHITE
BLACK
BLACK
{
Optional
WHITE
AUX
BLOTKHLSC SIGNATURE COMMAND
BLOWER
The BLOTKHLSC Blower Kit requires the SCSACM A/C
Module and the TSFRSC remote to install and operate
this kit. Refer to blower instructions for installation and re-
mote instructions for operation.
Electrical connections should only be
performed by a qualifi ed licensed electrician.
Main power supply must be turned off before
connecting the fan to the main electrical
power supply or performing service.
GREEN
Connector
Pin To Contro l Box
Control Box
KHLDV Series Gas Fireplace
AC Module
FP2705
33