Vermont Castings KHLDV400PTSCSB Installation And Operating Instructions Manual page 26

KHLDV Series Gas Fireplace
Figure 34 -
Blower Wiring Diagram
FP2137
Figure 35 -
Blower Access Covers
14. Replace side panels attached to the glass frame
assembly with the louvered side panels provided with
the blower kit by unfastening the four nuts for each
cover door. (Do not overtighten or stud may break
off.) Use three metal clip screws provided with kit to
secure the wire assembly in the front beneath the
access cover. Figure 36
15. Install the speed control (rheostat switch) on the side
above the existing one used for the light (discard the
plate sent with the switch as it will not be needed.
16. Replace logs.
17. Replace the glass.
18. Replace the front plate below the glass frame. NOTE:
The front plate hides the wire harness in the front.
26
Blue
Junction Box
Blue
Black
Hi-Temp
T-Stat Sensor
Black
Blower
Rheostat
Clip
Firebox
Wall
MILLIVOLT: OPTIONAL FAN/BLOWER SYSTEM
Black
Right
Hi-Temp
Blower
Left
Blower
White
Replace with Louvered Access
Door, Louvers Towards Bottom
Figure 37 -
Location of White Dial on
Speed Control
Remove Solid
Access Door
Figure 36 -
Install New Louvers
FP2234
20306742