WDV Series Gas Fireplace
BLOTBLDVSC SIGNATURE COMMAND BLOWER
Blower (300w Max)
Figure 36 -
BLOTBLDVSC Blower Wiring Diagram
The BLOTBLDVSC Blower Kit requires the SCSACM A/C
Module and the TSFSC remote to install and operate this
kit. Refer to blower instructions for installation and remote
instructions for operation.
Electrical connections should only be
performed by a qualified licensed electrician.
Main power supply must be turned off before
connecting the fan to the main electrical
power supply or performing service.
The black and white wires on the AC box
wiring harness are marked 'Blower', 'Light'
and 'Aux'. It is important to use the wires
marked 'Blower' or the control will not work
correctly.
26
To Junction Box
In Fireplace
{
Light
WHITE
BLACK
WHITE
BLACK
{
BLACK
Optional
WHITE
AUX
FP2684
BLOTSDVSC fan wiring
GREEN
Connector
Pin To Contro l Box
Control Box
FINAL INSTALLATION
AC Module
20306744