Upgrade The Phone's Firmware; Viewing The Firmware Version; Upgrading The Firmware - Mitel 5215 Sip User And Administrator Manual

• To change a value, press CHANGE, enter the new value, and then press SUBMIT.
After the information is saved, the next setting appears on the display.
• To leave a value as it is, press EXIT or NEXT.
8. Repeat steps 4 and 5 until all desired changes have been made.
9. Press Superkey to return to the default display.
10. For the settings to take effect, reboot the phone (i.e. unplug the power source from the
phone, and then plug the power source back in).
Note: For information on hotkeys to reboot the 5215 or 5220 IP Phone, refer to the Web
Configuration Tool online Help for the Administrator (see Supporting Documentation
on page 2).
Note: To modify additional network settings available in the boot program, see Appendix B
— Configuring SIP Settings in the Boot Program on page 44.
Note: You can also use the Web Configuration Tool to modify the network settings. To do
so, access the tool's Network Configuration page (see The Web Configuration Tool on
page 7).

Upgrade the Phone's Firmware

The phone uses TFTP to download firmware from a TFTP server, or HTTP to download
firmware from the HTTP server. You can use either the phone or the Web Configuration Tool
(see The Web Configuration Tool on page 7) to perform a firmware upgrade. If you use the
Web Configuration Tool, access the tool's Firmware Update page.
If you use the Web Configuration Tool, the phone's original configuration is preserved;
therefore, the phone will function as it did prior to upgrade, without the need to reconfigure
settings.
If you use the options available on the phone, previous configurations may not be saved and
restored; therefore, you may have to manually reload a previously saved configuration file or
manually reconfigure phone parameters.

Viewing the Firmware Version

To view the current firmware version:
1. Press Superkey.
2. Press the Line 2 key. Both the main and boot firmware versions appear on the display.
3. Press Superkey to return to the default display.
Note: You also view firmware versions on the Web Configuration Tool home page (see The
Web Configuration Tool on page 7).

Upgrading the Firmware

To upgrade the phone's firmware through the Superkey Menu Interface, download the new
firmware from the appropriate HTTP or TFTP server. To program the HTTP or TFTP server,
- 37 -
Administrator Tools