6. Do one of the following:
•
To return to the Features menu, press Exit.
•
To return to the default display, press Settings
Network Settings
View the IP and MAC Addresses
To view the phone's IP and MAC addresses:
1. Press Settings
in the information area.
2. Press Settings
Modifying Network Settings
To modify network settings using the Web Configuration Tool:
• Access the Configuring Network Settings page of the Administrator's Web Configuration
Tool.
To modify network settings using the Settings Key:
1. Press Settings
2. Press OK, and then press Next until NETWORK SETTINGS? appears.
3. Press OK, enter your administrator password, and then press Submit.
4. Press Next until the network configuration parameter you want to change appears.
5. Press Review to view the current settings of the selected parameter, and then do one of
the following:
•
(Optional) To enable or disable the parameter, press TurnOn or TurnOff.
•
To change a value, press Change, enter the new value, and then press Submit.
After the information is saved, the next setting appears.
•
To leave a value as it is, press Next to move to the next value or Exit to return to the
Features menu.
6. Repeat steps 4 and 5 until all desired changes have been made.
7. Press Settings
8. For the settings to take effect, reboot the phone (unp
phone, and then plug the power source back in).
Upgrade the Phone's Firmware
IMPORTANT! To upgrade to Release 7.0, your software must be Release 5.0.0.21 or higher.
For detailed information about firmware upgrades:
• Access the About Firmware Updates Page
Tool Online Help (see page 7).
5330/5340 IP Phone SIP User and Administrator Guide
, and then press the Line 1 key. The IP and MAC addresses appear
to return to the default display.
, and then press >> until ADMIN TOOLS? appears on the display.
to return to the default display.
.
lug the power source from the
topic in the Administrator's Web Configuration
29