Table of Contents
Advertisement
(c) Byte 7
RelAdr (relative addressing):
Relative logic block addressing
WBus32 (32-bit wide data transfer) :
Data transfer on a 4-byte bus
WBus16 (16-bit wide data transfer) :
Data transfer on a 2-byte bus
Sync (synchronous data transfer):
Data transfer in the synchronous mode
Linked (linked command):
Command link function
TTD (target transfer disable):
TARGET TRANSFER DISABLE Message [0]
Cmd/Que (command queuing):
Tagged command queuing feature
SftRe (soft reset):
"soft" RESET condition
i. Vendor ID Field
This field indicates the name of the product's supplier in left-justified ASCII code, and
always displays FUJITSU. The unused right end is space for the ASCII code.
j. Product ID Field
The product's model name is displayed in left-justified ASCII code in this field. The
model name display is one of the following.
k. Product Revision Field
The IDD's microcode version number is displayed in ASCII code in this field.
l. Device Serial Number Field
The value following byte 4 of the device serial number in the VPD information is
indicated in this field. Higher order digits which do not contain valid numbers are filled
with ASCII code spaces (X '20'). After byte 48, all the positions contain "00."
[0]
[0]
[0/1]
[1]
[1]
[1]
[0]
C141-E039-01EN
3 - 7
Advertisement
Table of Contents
