Table of Contents
Advertisement
SCSI ........................ Small Computer System Interface
The standardized input/output interface of the American National Standards
Institute (ANSI). [Standard No.: ANSI X3. 131-1986]
SCSI Device............. The general name given to a device which is connected to the SCSI bus
(input/output device, I/O controller, host adapter, etc.).
SCSI ID.................... On the SCSI bus, this is the physical serial number which identifies a SCSI
device. This is a unique value for each SCSI device and the ID can be assigned
from #0~#7 to correspond to the bit number of the SCSI data bus.
Sense Code............... This is a 1-byte code displayed in the sense data and is information which
specifies the type of error that was detected.
Sense Data................ When several items of error information are included in a command's completion
status, this is information generated by the target for reporting detailed
information on that status.
Sense Key................. This is a 4-bit code displayed in the sense data. It contains information for
classifying the type of error that was detected.
Status........................ This is 1 byte of information reported to the initiator by the target device when
execution of each command is completed, which displays the command's
completion state.
Target (TARG)......... This is the SCSI device that executes the input/output operations initiated by the
initiator (INIT). In this manual, target is abbreviated "TARG."
GL - 2
C141-E039-01EN
Advertisement
Table of Contents
