Table of Contents
Advertisement
C*
Q*
Name
15
01 Mechanical positioning error A seek error occurred in the drive.
02 Positioning error detected
by read of medium
80 Off-track detected
81 No on track after SKC
F0 Calibration failed
01 Recovered data with retries
17
00 Recovered data with ECC
18
applied
01 Recovered data with ECC
& retries applied
02 Recovered data with ECC
and/or retries, data auto-
reallocated
80 Recovered data with ECC
and/or retries, re-write
applied
00 Defect list error
19
02 Defect list error in primary
list
03 Defect list error in grown
list
04 SA Control code read
error
05 Defect list error in
management list
06 Cylinder skew table read
error
80 Log information read error An error was detected during reading of statistical
81 Log information write
error
82 Mode select SA read error An error was detected during reading of SA
83 Mode select SA write error An error was detected during writing of SA
19
* C: Sense Code, Q: Sub-sense Code
Table 4.2
Sense and subsense codes (2 of 7)
The cylinder address in the ID area did not match.
Went off-track while it was on track.
On track could not be detected after seek was
completed.
Calibration was terminated with an error.
A data error was recovered from by reading was
retried.
A data error was recovered from immediately by
ECC correction.
A data error was recovered from by ECC correction
after reading was retried.
A data error was recovered by ECC correction and
auto alternate block allocation was applied.
A data error was recovered by ECC correction and
the same block was recovered by rewriting.
An error was detected during reading of defect
control information.
An error was detected during reading of the defect
list (P List).
An error was detected during reading of the defect
list (G List).
An error was detected during reading of the SA
update control code.
An error was detected during reading of the defect
control table.
An error was detected during reading of the cylinder
skew table.
information.
A write error was detected during writing of
statistical information.
information (Mode select parameter).
information (Mode select parameter).
C141-E039-01EN
Explanation
Sense
key
1, 4
1, 4
4
4
1, 4
1
1
1
1
1
3
3
3
3
3
3
3
3
3
3
4 - 7
Advertisement
Table of Contents
