System Cleaning Programs - Panasonic NN-CS894S Operating Instructions Manual

System cleaning programs

F1. Drain water
Water is pumped through the system to clean the pipes. The water is drained into the
drip tray.
Add 100 g of water to the
water tank. Ensure drip tray
is empty.
„ notes
1. Only run this program with 100 g of water in the tank.
2. Do not remove the drip tray during the drain water program. If the drip tray is removed
during the program, U12 is displayed and the program will stop.
3. Empty the drip tray and rinse with running water after the program has finished.
„ Caution
4. If the 'Drain water program is used directly after a steam cooking program, hot water may
be drained into the drip tray.
F2. SyStem Cleaning
The first stage of this program cleans the system with a citric acid solution. The second
stage runs water through the system to rinse the pipes.
Make a solution of 8 g citric acid
and 200 g of water, add the
solution to the water tank. Ensure
drip tray is empty.
After the program has paused,
fill the steam tank with water.
(to max level).
„ notes
1. When is displayed, run the 'system cleaning' program.
2. If the system cleaning program is not used regularly, the pipe will get blocked and the
steaming performance will be less effective.
3. Do not remove the drip tray during the drain program. If the drip tray is removed during
the program, U12 is displayed and the program will stop.
4. Empty the drip tray and rinse with running water after the program has finished.
Tap auto steam 9 times
until F1 Drain water
program appears in the
display.
Tap auto steam 10 times
until F2 system cleaning
program appears in the
display.
Touch Start. The program
will run for approx. 1 min.
Empty the drip tray after the
program has finished.
41
EN
Touch Start.
Empty the drip tray
after the program
has finished.
Touch Start. The
program will run for
29 mins.