Cleaning Water Tank - Panasonic NN-CS894S Operating Instructions Manual

Cleaning the water tank
Clean with a soft sponge in water.
Remove the water tank and clean the
compartment where the water tank is
inserted.
If the pipe cap is difficlult to remove, wiggle
from side to side. When re-fitting, make sure
that the pipe faces down (see diagram).
The rubber seal and front of the tank can also be removed for cleaning.
Removing the rubber seal
Removing the front cover
1
Re-fitting the front cover
1
„ Notes
1. Clean the water tank at least once a week to prevent build up of limescale.
2. Do not use a dishwasher to clean the water tank or parts of the water tank.
Open the water supply cap, remove the lid
and pipe cap and clean.
pipe cap
ensure it faces downwards
inside outside
(flat)
(protruding
side)
Ensure that the rubber seal is not inside
out when re-fitting. If the seal is not fitted
correctly the lid will not close securely and it
will leak.
1. Lightly twist the cover until the far side
2 2
2. Continue to twist until the near side
1. Align the slots on the cover with the holes
2
2. Insert and push down until it clicks.
42
unclips.
unclips.
on the tank.
EN