Questions And Answers - Panasonic NN-CS894S Operating Instructions Manual

Questions and answers

Q: Can I check the pre-set oven temperature
while cooking or preheating by
CONVECTION?
A: Yes. Touch the Convection key and the
oven temperature will appear in the
display window for 2 seconds.
Q "D" appears in the display and the oven
does not cook. Why?
A: The oven has been programmed in
DEMO MODE. This mode is designed
for retail store display. Deactivate this
mode by touching microwave key once
and Stop/Cancel key 4 times.
Q. The word prompt has disappeared on my
display, I can only see numbers ?
A: There may have been a power failure,
and the wordprompt is disabled. Unplug
the oven for a few seconds, then plug it
in again. When "88:88" is displayed, tap
Start until your language is displayed.
Then set the clock. Refer to page 18
EN.
Q. The control panel keys do not respond when
touched. Why?
A: Ensure the oven is plugged in. The oven
may be in stand-by mode. Open and
close the door to activate.
Q. The oven stops cooking by steam or
combination with steam and U14 appears in
the display
A: The water tank is empty and the
operation guide has been turned off.
Re-fill the water tank, position back in
the oven and touch Start to resume
cooking.
Q. The oven stops program and "U12" appears
in the display.
A: The drip tray is not in position, position
back in the oven. Restart program.
47
EN