System Cleaning Setting; Cavity Cleaning Setting - Panasonic NN-DS58HB Owner's Manual

Operation — Cleaning Feature (System Cleaning / Cavity Cleaning)
26. System Cleaning
Setting
The first stage of this program
cleans the system with a citric
acid solution. The second
stage runs water through the
system to rinse the pipes.
1
Make a solution of 16 g citric
tasse (200 g) of
¾
acid and
water, add the solution to the
water tank. Ensure drip tray is
empty.
2
Touch 12 times.
3
Touch once.
The program will run for
approx. 29 minutes.
F0003BU00CP_Eng_170301.indd 43
4
After the program has paused,
empty the drip tray and fill the
water tank with water (to max
level).
5
Touch once.
The program will run for
approx. 1 minute. Empty the
drip tray after the program has
finished.
NOTES:
1. Fill the water tank before
use.
2. When " " appears in the
display, run the 'system
cleaning' program.
3. If the system cleaning
program is not used
regularly, the pipe will get
blocked and the steaming
performance will be less
effective.
4. Do not remove the drip
tray during the drain
program.
5. Empty the drip tray and
rinse with running tap
water after the program
has finished.
27. Cavity Cleaning
Setting
This feature is available when
the cavity is built up with fat or
grease (20 minutes is needed).
1
Touch 13 times.
2
Touch once.
The cooking time appears
in the display window and
begins to count down.
NOTES:
1. Fill the water tank before
use.
2. After cleaning, open the
door and wipe with a damp
cloth.
43
(continued)
2017/3/1 15:45:51