Navigate To A Waypoint; Set Man Overboard (Mob) Waypoint - Lowrance LMS-522c iGPS Installation And Operation Instructions Manual

Create Waypoint on Map
1. Use the arrow keys to move the cursor crosshairs to the place where
you want to make a waypoint.
2. Press |
WPT
name with a sequential number, like "waypoint 001." The waypoint
symbol and number appear on the map.

Navigate To a Waypoint

You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command (we'll describe how later in
this section.) However, you can avoid scrolling the map to pick your
waypoint if you use the Find Waypoint commands:
1. Press |→ to
WPT
↓ to |
N
EAREST
waypoint list), press
2. If your waypoint list is a long one, you can spell out the waypoint name
in the
F B
IND Y
character, then press → to move the cursor to the next character and re-
peat until the name is correct, then press
3. If the list is short, you can jump directly to the
ing . Use ↑ or ↓ to select the waypoint name, press
ENT
point information screen appears with the
4. To begin navigating to the waypoint, press
Course line
(dotted)
Off course
range, set at
0.20 mile
Navigation Page, navigating toward waypoint 004 and leaving a trail.

Set Man Overboard (MOB) Waypoint

One of boating's most terrifying events is having a friend or family
member fall overboard. This situation can be deadly on any body of wa-
ter. It's particularly dangerous at night or if you're out of sight of land.
. The waypoint is saved and automatically given a
WPT
|
S ENT
AVED
; or, to look by name (and scroll through the entire
ENT
. For this example, let's look by name.
ENT
box to search for it. (Press ↑ or ↓ to change the first
N
AME
. To look up the nearest waypoint, press
ENT
G
O
123
to jump to the list below.)
F I L
IND N IST
ENT
command selected.
T
O
.
ENT
Waypoint
Destination
name
box by press-
and the way-
Trail line
(solid)